810W61851-6031 Rear Suspended Hydraulic Lock Assembly for the Cab (Cabin Safety lock)

I. Product Name and Part Number
Part Number:810W61851-6031
Product Name: Rear Suspended Hydraulic Lock Assembly for Cab, Cab Installation
Full lock
Second, compatible vehicle models
Compatible with heavy truck Howo TX, Howo T5G, andShandeka C7H cabs, it provides original factorylocking accessories for the rear of the cab, and can beassembled in pairs with approximately810W61851-6031/6030.
Three. Product Function
1. Secure the cab securely while driving,
suppress bounce, left and right movements,
and eliminate abnormal vehicle noises
2. Lock the rear cylinder and lift the cab smoothly,facilitating engine and chassis maintenanceoperations
3. A mechanical and hydraulic dual lock compactstructure that prevents thecab from accidentallypopping open during driving. Driving safety

4. Support the impact force at the rear of the driving chamber,reduce abnormal wear of the rear suspension bracket andrubber sleeve, and extend the service life of vehicle
components.
Four. Replacement Assessment (Replacement is recommended in the following situations)
. The lock body cannot be locked properly, the latch position is closed, and the driver’s cabin has significant shaking.
2. A collision and unusual noises were heard from the rear of a vehicle on a bumpy road section.
3. Latch deformation, snap snap snap fracture, hydraulic pressure relief, unlock lag
Not smooth
. The original vehicle lock is rusty and stuck, making it impossible to open, close, and stop properly.
Five. Product Quality Advantages
The factory data mold opening, positioning, and pipinginterfaces are fully compatible with the original vehicleallowing direct installation without modification.
Thickened cold-rolled steel plate body, surface rust preventiontreatment, rain resistance, water and dust corrosion
resistance, and resistance to deformation under heavy load.
helprecision tongue latching structure provides fim locking without loosening, and is fatigue -resistant
High durability

The liquid chamber has good sealing performance, slow pressure, smooth opening and closing, and faults.
Low rate
he repair shop replaces and repairs regular wear parts, offering simple and time-saving assembly.
Six. Installation Tips
1. Distinguish left and right parts, check the part numbers before loading, and avoid reverse installation.
Unlockable
2. Accurate alignment of bracket debris and certificate clamps during installation.
3. After assembly, repeatedly open and close the test locking and unlocking functionsRecognize no delays before using it on the road.